Showing all 3 results

£11,793.79 - £11,793.79 (exc. VAT)
£13,600.45 - £13,600.45 (exc. VAT)
£23,309.82 - £23,309.82 (exc. VAT)

Clack WS3 simplex softeners are used for only the largest industrial applications. They will be able to deliver soft water at flow rates between 40m3/hr to 56m3/hr. These systems will be best applied on applications that require a large volume in a short period of time, but then remain idle for long periods. As this utilises a single vessel hard water will pass to service when the system goes into regeneration. Clack WS3 water softener units are only suitable for large industrial and commercial uses.

Meter controlled systems are more technically advanced as they calculate the amount of soft water that has been processed and determine when to initiate a regeneration process according to Wateq’s pre-calculated settings.

We can tailor the regeneration process so that this can occur during low periods of water usage, this ensures that there is never an interruption to the supply of water. These systems are ideal for situations that do not require soft water 24/7. Our systems are built by our team of senior engineers providing the reliability you require and have a typical resin life expectancy of around 10 to 15 years.

Metered Clack simplex softeners consist of all the required components to allow you to start softening your water straight away.

RefDescriptionTank SizeResin QuantityFlow Rate"* Capacity
@ 300 ppm"** Salt Usage Per Regen
SS1000-C31000 Litre, WS3 Metered Softener42” x 78”1000 Litres40.00 m3/hr166.66 m3120.0 kg
SS1250-C31250 Litre, WS3 Metered Softener48” x 82”1250 Litres50.00 m3/hr208.33 m3150.0 kg
SS1800-C31800 Litre, WS3 Metered Softener63” x 67”1800 Litres56.76 m3/hr300.00 m3216.0 kg
* Capacity based on 50g CaCO3 hardness removed per litre of resin.
** Salt usage based on 120g per litre of resin. This will increase if salt dosage is increased.